TP-01 · Plumbing
Gold Coast Plumber: Repairs, Leaks & Installations
Tensor Plumbing is a licensed Gold Coast plumber based in Parkwood. We fix leaking taps, running toilets, burst pipes and low water pressure, and install new tapware and fixtures for homes in Southport, Arundel, Helensvale, Nerang and across the Gold Coast, with a clear quote before work starts.
Everyday plumbing
Plumbing jobs we do every week on the Gold Coast
From a dripping mixer in Southport to a new laundry in Pacific Pines, this is the everyday work a local Gold Coast plumber handles.
Leaking taps and mixers
A dripping tap is usually a worn washer or cartridge. We repair or replace it with a compatible part, and tell you when the whole mixer is worth replacing.
Running or leaking toilets
Cisterns that run on, refill on their own or leak at the pan connector waste a surprising amount of water. Inlet and outlet valves are a quick fix.
Burst and leaking pipes
We isolate, repair and pressure test the affected section. If water has got into walls or ceilings, we can investigate how far it has travelled.
Low water pressure
We test at the meter and at the fixtures to find whether it's the supply, a valve, corroded pipe or one blocked aerator, before recommending anything.
Water hammer and noisy pipes
Banging when a tap closes usually points to high pressure or loose pipework. We fix the cause, not just the noise.
Pressure-limiting valves
A failed pressure-limiting valve at the meter makes taps wear quickly and relief valves drip. Testing and replacement is a common, worthwhile job.
New taps, vanities and fixtures
Supply and install, or fit products you've bought once we've confirmed they're compliant and suitable for your home's pressure and pipework.
Kitchen and laundry installs
Sinks, mixers, dishwasher and washing machine connections, and replacing ageing braided hoses before they burst.
Outdoor taps and garden lines
Leaking hose cocks, corroded outdoor taps near the coast and leaks on garden and irrigation lines.
Rainwater tanks and pumps
Plumbing connections for rainwater tanks and pressure pumps, including leaks that make a pump cycle on and off.
Bathroom renovation plumbing
Rough-in before the walls are closed and fit-off once tiling is done, coordinated with your builder or tiler, depending on the project.
Hot water and gas
Most plumbing visits touch hot water or gas at some point. We're licensed for both, so one visit can cover it.
Typical problems
Common plumbing repairs we do across the Gold Coast
- Dripping taps, running toilets and worn cartridges
- Low or inconsistent water pressure
- Noisy pipes, water hammer and vibrating fittings
- Fixture, tapware and appliance connections
- Burst or weeping pipes and isolation valve faults
- Pre-sale or pre-lease plumbing checks
What a visit may involve
Methodical, not one-size-fits-all.
- 01
A conversation about the symptom, when it started and what has changed
- 02
Inspection of the accessible fixtures, fittings and pipework
- 03
Testing where it helps narrow the cause, such as flow or pressure checks
- 04
A clear explanation of the repair options before work begins
What you receive
- Completed repair or installation within the agreed scope
- Before-and-after photos on request
- Plain-English notes on anything outside the scope of the visit
Scope and limits
Some faults sit behind finished surfaces or inside structures we cannot access without approval. We will tell you what we could and could not inspect.
Do this first
Burst pipe or leak right now?
Stop the water, then call
- Turn off the water at the meter (usually near the front boundary) or at the stop valve for that fixture.
- If the hot water system is involved, turn off its power or gas, and the cold water valve to the unit, if it's safe to do so.
- Keep water away from power points and appliances, and switch off affected circuits if water is near electrics.
- Take dated photos of the damage for your insurer.
- Call us on 0404 730 692. We work business hours (Mon–Fri, 7am–5pm). Outside them, leave a message and we'll book you into the first available slot.
Local knowledge
Plumbing problems specific to Gold Coast homes
The Gold Coast's housing was built in waves, and each wave has its own plumbing habits. Older homes in Southport, Labrador and Ashmore, many from the 1960s to the 1980s, can still have galvanised steel or original copper water pipes. Galvanised pipe corrodes from the inside, causing low pressure and rusty water, while ageing copper can develop pinhole leaks. Earthenware sewer pipes in the same streets let tree roots in at the joints.
On the coastal strip and the canal estates around Runaway Bay, Biggera Waters and the Broadwater, salt air corrodes outdoor taps, meter fittings and hot water connections faster than inland. Newer estates in Coomera, Pimpama and Ormeau have the opposite problem: young homes where builder-grade fittings and the occasional installation defect show up in the first few years, sometimes while the builder's warranty still applies.
Acreage in Bonogin, Tallai and Wongawallan often runs on rainwater tanks and pressure pumps, and high-rise and body corporate buildings in Surfers Paradise and Southport add access rules and shared services to the job. Knowing which of these you're dealing with is half the diagnosis.
Process
How our plumbing service works
- 01
Call or book
Call 0404 730 692 or send the quote form with your suburb and a photo or two. We reply within one business day.
- 02
Diagnosis and a clear scope
We find the cause, explain what we found and agree exactly what will be done.
- 03
Fixed quote before work
You get the price before the repair starts. If something unexpected turns up, we stop and talk to you first.
- 04
Documented completion
Work tested and finished, with photos on request and notes on anything outside the scope of the visit.
Leaking tap, running toilet or low pressure? Talk to a local Gold Coast plumber.
Plumbing faults often connect to other systems. If the problem involves hot water, gas, a hidden leak or a drain, see: hot water repairs and replacement, gas fitting, leak detection on the Gold Coast, blocked drains and CCTV and plumbing maintenance for rentals.
Reviews
Read what Gold Coast customers say on Google.
Reviews from real customers live on our Google Business Profile.
Service areas
Plumbing across the Gold Coast: where we work
Based in Parkwood, we cover Gold Coast suburbs within about 30 minutes: from Ormeau and Pimpama in the north to Burleigh and Currumbin in the south, and out to Nerang and Mudgeeraba.
Central: Parkwood, Southport to Mermaid Beach
- Plumber Parkwood
- Plumber Arundel
- Plumber Molendinar
- Plumber Ashmore
- Plumber Southport
- Plumber Benowa
- Plumber Bundall
- Surfers Paradise
- Main Beach
- Broadbeach Waters
- Clear Island Waters
- Mermaid Waters
- Broadbeach
- Mermaid Beach
Broadwater: Labrador to Hope Island
North: Helensvale and Coomera to Ormeau
- Plumber Gaven
- Plumber Helensvale
- Plumber Pacific Pines
- Oxenford
- Upper Coomera
- Maudsland
- Coomera
- Pimpama
- Ormeau
- Ormeau Hills
- Willow Vale
- Wongawallan
- Jacobs Well
West & South: Nerang to Currumbin
- Plumber Nerang
- Plumber Highland Park
- Plumber Carrara
- Merrimac
- Worongary
- Gilston
- Tallai
- Robina
- Mudgeeraba
- Advancetown
- Reedy Creek
- Varsity Lakes
- Burleigh Heads
- Burleigh Waters
- Tallebudgera
- Palm Beach
- Elanora
- Miami
- Bonogin
- Currumbin
- Currumbin Waters
All Gold Coast service areas · Not listed? Call us and we'll confirm.
Questions
Plumbing FAQs: Gold Coast
Do you charge a call-out fee?
We tell you about any attendance or diagnostic charge when you book, before we arrive, and we give you a price for the repair before any work starts. No surprises on the invoice.
Are you available on weekends?
We work Monday to Friday, 7am to 5pm, and Saturdays by arrangement. Outside those hours, leave a message or send the quote form and we'll book you into the first available slot.
Do you work on rental properties on the Gold Coast?
Yes. We work with property managers and landlords across the Gold Coast, arrange access with tenants through the manager, and send photos and a short report after the job.
Can you fix low water pressure?
Usually. Common causes are a failed pressure-limiting valve, a partly closed or worn valve, corroded pipework or a blocked aerator. We test where the pressure drops before recommending a fix.
Do you do bathroom renovation plumbing?
Yes, depending on the project's size and timing: rough-in before the walls are closed and fit-off once tiling is done. Tell us the scope and your builder's or tiler's schedule when you enquire.
Do you give a price before starting work?
Yes. Once we have inspected the issue we explain the options and agree the scope before any repair begins. If something unexpected appears mid-job, we stop and discuss it first.
Can you replace fixtures I have already purchased?
Usually, yes, provided the product is suitable for Australian conditions and compliant for installation. We will confirm compatibility before fitting.
Do you service units and townhouses?
Yes. For strata properties we may need body corporate or property manager approval for work on common property.
Connected systems
Related services
TP-04Hot water systems
No hot water? Repairs, replacement and new installs for electric, gas, solar and heat pump systems across the Gold Coast.
Explore hot water systems
TP-03Gas fitting
Licensed gas fitter for cooktops, BBQ points, gas hot water, LPG and natural gas lines, leak testing and compliance certificates.
Explore gas fitting
TP-05Leak detection
Water leak detection on the Gold Coast with thermal imaging, pressure testing and moisture mapping, plus written reports.
Explore leak detection
TP-02Drainage
Blocked drains cleared, then CCTV drain camera inspections to find tree roots, cracked pipes and the real cause.
Explore drainage
TP-07Maintenance
Plumbing maintenance for Gold Coast homes, rentals and body corporates, with photo reports after every visit.
Explore maintenanceLet's understand the problem
Tell us what you've noticed.
Share what you've noticed, where the property is and what kind of help you need. We'll confirm whether the job fits our service area and scope, then explain the next step.